森野精机（无锡）有限公司
森野精机（无锡）有限公司
机台特性●主结构铸件采用HT300材质，表面硬度不低于HB250，经高温退火及自然时效处理
| 机台特性 ● 主结构铸件采用HT300材质，表面硬度不低于HB250，经高温退火及自然时效处理。 | |
 | ● The main structure castings are made of HT300 material, the surface hardness is not less than HB250, and they are subjected to high temperature annealing and natural aging treatment. ● Reasonable cloth ribs provide good overall rigidity, keep the fundamental frequency away from the resonance zone, and ensure processing finish ● The base has three layers, the column has two layers of rib casting structure, the super wide base, the head and the column joint surface adopts a 1:1:1 design to increase cutting rigidity. The fuselage adopts a 45-degree integral diagonal back casting design, showing unique machining accuracy. ● The feed axis adopts imported roller linear rail support (X, Z axis adopts enhanced 45 specifications) to ensure the high load and high precision of the machine tool. |
机械规格表
标准附件
● 塘刀座
● 端面刀座
● 刀柄套(组)
● 外径刀座
● 切削水冷却系统
● 水平调整螺丝及垫片
● 自动润滑系统
● 工作灯
● 油压夹头脚踏开关
● 工具及工具箱
● 操作及维护说明书
● 履带式排屑装置 ● Pond knife seat
● End tool holder
● Tool handle set (set)
● Outer diameter tool holder
● Cutting water cooling system
● Level adjustment screws and washers
● Automatic lubrication system
● working lamp
● Hydraulic chuck foot switch
● Tools and Toolbox
● Operation and maintenance manual
● Crawler chip removal device
特别附件
| ● 伺服刀塔 ● VDI动力刀塔 ● 手动尾座 ● 工件收集器 ● 刀具量测装置 ● 油水分离装置 ● 送料机/送料机界面 ● 气压自动门 ● 弹性筒夹 ● 安全防撞装置 | ● Servo turret ● VDI Power Turret ● Manual tailstock ● Workpiece collector ● Tool measuring device ● Oil-water separation device ● Feeder/Feeder interface ● Pneumatic automatic door ● Elastic collet ● Safety anti-collision device |
您感兴趣的产品PRODUCTS YOU ARE INTERESTED IN
农机网 设计制作，未经允许翻录必究 .
请输入账号
请输入密码
请输验证码
