麦海勒（北京）农业科技有限公司
麦海勒（北京）农业科技有限公司
McHale F5500 Heavy Duty Fixed Chamber Round Baler with a 15 Knife Chopper Unit and Drop Floor Unblocking System
As with all McHale machines the McHale F5500 fixed chamber round baler has been designed with the demands of today’s farmer and contractors in mind. This common sense approach to design ensures that machine operation is kept simple and user friendly.
Features like progressive greasing and oiling and drop floor unblocking system, when combined with high specification components ensure long life, reliability and a machine that is rugged enough to handle the toughest of crop and ground conditions.
Standard Features on the F5500 Round Baler include:
The F5500 Round Baler delivers a machine which is loaded with features and rugged enough to handle the toughest of crop and ground conditions.
On the McHale F5500 Heavy Duty Round Baler, the left hａnd side of the gearbox drives the rollers in the bale chamber, while the pick up and chopper unit are driven from the right hａnd side of the machine. This system ensures direct short transfer paths and optimal power distribution.
The McHale F5500 heavy duty round baler is equipped with a 2.1 metre galvanised pick up that lifts even the shortest of crop. Accurate height control can be achieved through a spring balanced hydraulic lifting system. The machine comes standard with pneumatic guide wheels, which contact the ground on exactly the same line as the tines and guide the pick up perfectly over uneven ground.
Read MoreThe pick up on the F5500 fixed chamber round baler is fitted with lateral feed augers that smoothly guide the crop into the chopping unit. The pick up features:
A crop compression roller is also available as an optional extra on the McHale F5500 round baler. This roller evens out lumps in the swarth and minimises the risk of blockages when working in heavy swarths.
The McHale F5500 round baler is equipped with a 15 knife chopper unit. As crop enters the spiral rotor, pairs of rotating tines feed the crop through the chopping unit. The double tines on the rotor ensure high output while the spiral layout reduces the load peaks as the machine works in heavy swarths. The rotor design encourages a uniform crop flow, which reduces the risk of blockages, thus maximising output.
Read MoreWith all 15 knives engaged, a theoretical chop length of 65mm is delivered. Knives can be engaged and disengaged from the tractor cab.
The McHale F5500 round baler is designed to achieve maximum output, however as baling conditions are not always ideal, uneven swarths can occur, which can lead to blockages. The main drive chain on the F5500 fixed chamber round baler is protected by a slip clutch on the PTO.
Read More
The bale chamber on the McHale F5500 round baler produces a 1.23 X 1.25 metre round bale. The bale chamber on the F5500 round baler is comprised of 18 heavy duty rollers.
Read MoreThe 18 rollers in the bale chamber of the F5500 round baler are made from high-grade tubular steel for maximum strength, while the roller design ensures maximum traction.
The roller ends are fitted with heavy-duty 50mm shafts on the drive and non-drive side. The roller ends are fitted with a McHale-designed reverse thread sealing system. This system protects the bearings; when the roller moves in one direction the thread on the seal moves in the opposite direction. This ensures that any material which tries to get into the back of the bearings is automatically threaded out.
The rollers on the McHale F5500 round baler are fitted with 50mm bearings on the drive and non-drive side. Drive side rollers, which experience the most load, are fitted with double raced bearings.
Read MoreThe McHale F5500 round baler is fitted with heavy-duty drive chains and sprockets, which ensure long life and minimum down time.
A progressive greasing system supports the bearings.
Read More
The blocks measure and regulate the amount of grease going to the bearings. This ensures that the machine consistently delivers the correct amount of grease depending on the load the bearings are under.
The cab-mounted wizard plus control box is the operator’s link to this efficient machine.
Read MoreIts features include;
A new high performance netter has been designed and developed for the F5000 range.
Read MoreThe net tension can be simply adjusted on a variable pulley on the right hａnd side of the machine and a decal displays the various settings that can be achieved using the system, depending on the net quality being used. This netter is very reliable and features:
Net loading has been optimised on the F5000 baler range by the simple yet very effective rock and roll net loading system. The operator simply releases the straps on the spare roll of net on the machine platform and rocks the net roll from its storage position over the lip in the platform and rolls it into the net box. Storage for an extra roll of net is provided on the baler platform.
| Width | 2.55/2.58m* |
| Length | 4.05m |
| Weight | 3500kg |
| Height | 2.45m |
| Working Width | 2100mm |
| Pick Up Guide Wheels | Standard |
| Pick Up Lift | Hydraulic |
| Crop Roller | Optional |
| Short Crop Guard | Standard |
| Tine spacing | 70mm |
| Tine Bars | 5 |
| Unblocking System | Drop Floor |
| Knife Deactivation | Hydraulic from Cab |
| Knife Protection | Hydraulic |
| Theoretical Chop Length | 65mm |
| Number of Knives | 15 |
| Width (m) | 1.23 |
| Diameter (m) | 1.25 |
| Greasing | Automatic Progressive |
| Bearings | 50mm** |
| Number of Rollers | 18 |
| Bale Chamber Feed | Baler Rotor |
| Net Adjustment | Manual on Baler |
| Net System | Vario Stretch |
| Net Roll Capacity | 1 + 1 Storage |
| Control | Manual or Automatic |
| Chain Lubrication | Continuous |
| Pick Up Protection | Slip Clutch |
| Main Drive Protection | Cam Clutch |
| Gearbox | Split Drive |
| Density Adjustment | On Baler Valve |
| Operation | Semi |
| Control System | Wizard Plus |
| Axle | 8 stud |
| Road Lights | Standard |
| Bale kicker Indicator | Not Available |
| Tyres Optional | 500/50 – 22.5 |
| Tyres Standard | 500/50 – 17 |
| Hydraulics | 2 Double acting spools |
| Minimum Power Requirement | 67kW (90hp) |
| *Width will depend on tyre selection | **Bearings are double raced on the main load points |
您感兴趣的产品PRODUCTS YOU ARE INTERESTED IN
农机网 设计制作，未经允许翻录必究 .
请输入账号
请输入密码
请输验证码
