| 版本 | Tank capacity (LITRES) | Boom width (METERS) | Pump (l/min - bar) | Track width (mm) | Boom lifting (mm) | Boom sections |
|---|---|---|---|---|---|---|
| 22 | 2400 | 18 - 28 | 250 - 20 | 1500-2100 | 1500 | 5-7-9 |
| 32 | 3200 | 18 - 28 | 250 - 20 | 1600-2250 | 1500 | 5-7-9 |
- Tri-jet nozzles
- PTO shaft
- Cealized cool panel
- Agitation circuit
- Clear water tank
- hａnd washing tank
- Inner tank 360° spinning nozzle
- DEVIOKIT
- Hydro-pneumatic boom dampener
- Pre-mixer
- Versions with manual cool, electric o computer managed
- 270/95-R44 tyres (for 2200)
- 270/95-R48 tyres (for 3200)
- Filling pipe, 8 m (50 mm) with floating filter
- Foam row marker
- PTO independent circuit
- Computer Easy-spray (ISOBUS – Basic terminal)
- GPS row marker (on non ISOBUS computer)
- ISOBUS monitor
- Tyres 230/95-R44
- Tyres 270/95-R44
- Tyres 270/95-R48 (only for 2200)
- Tyres 300/95-R46
- Tyres 340/85-R38 (only for 2200)
- Tyres 340/85-R48
- Tyres 380/85-R28 (only for 2200)
- Tyres 420/85-R38
"ALA 700" BOOM
ALA 700 features bigger sprayers as large as 32 m of working width. Last section folds sideward with no risk of accident involving high tension cables. Boom is featured with hydraulic lock of stabilizer, tilt corrector, independent geometry, tri-jet nozzles and 1400 mm hydraulic lifting. Hydro-pneumatic dampening is installed on cylinders of parallelogram.
AVAILABLE WIDTHS
24-27-28-32 m FOR POMPEO S4400/S6500
24-27-28 m FOR POMPEO S2200/S3200
24-27-28 m FOR POMPEO P2200/P3200
1
"ALA 600" BOOM
ALA 600 is the boom with side folding of last section, available in working widths up to 24 m: this particular configuration prevents any possible accident from hitting high tension lines. Boom is featured with hydraulic lock of stabilizer, tilt corrector, independent geometry, tri-jet nozzles and 1400 mm hydraulic lifting.
AVAILABLE WIDTHS
18-19-21-22-24 m FORPOMPEO S2200/S3200
18-19-21-22-24 m FOR POMPEO P2200/P3200
18-19-21-22 m FOR SIRIO 2200/3200
18 m FOR SATURNO 800/1000/1200
"ALA 500" BOOM
Model with working widths between 15 and 22 m, last section of the arms folds upwards allowing to easily overcome side obstacles. Boom is featured with hydraulic lock of stabilizer, tilt corrector, independent geometry, tri-jet nozzles and hydraulic lifting.
AVAIALBLE WIDTHS
18-19-21-22 m FORPOMPEO S2200/S3200
18-19-21-22 m FOR POMPEO P2200/P3200
18-19-21-22 m FOR SIRIO 2200/3200
15-16-18 m FOR SIRIO 1500/2000
18 m FOR SATURNO ONE 1300/1600/1900
15-16-18 m FOR SATURNO 800/1000/1200
CEALIZED COOL PANEL: ORDER BEFORE ALL!
The cool panel groups all the functions of the machine: all levers and main cools are clustered on the left side with clear indication for suction and delivery valves. Pre-mixer and hand-washing tap are very close to main panel to ease any operation in preparing treatment.
Cool unit
Pressure cool units are available on 3 levels: manual, electrical or computer assisted (see table pag 23). Mechanical ones have a remote general switch to cool the ON/OFF function from the driver’s seat. Machines with the electric pressure adjuster have a set of electro-valves to cool all the booms movements from a console installed in the cab; with this solution a single double effect oil fast plug is required.
Stabilizer
To spray uniformly chemicals is a primary issue to keep the boom stable and always parallel to the soil. The stabilizer device has a key role in matching this target, specially when operating at high speed. On trailed machine booms are hanged to single-hinge or parallelogram devices between boom and frame connection. Oscillation is reduced by gas-pistons or return-springs.
Dampened boom
All Booms for SIRIO and POMPEO can be provided of an hydro-pneumatic dampener with nitrogen accumulator to reduce at the best bouncing from working on uneven soils.
AIR FLOW (optional)
AIR FLOW improves work capacity of machine, allowing it to operate even in presence of wind up to 6/8 km/h (20-28 km/h). Spraying drift is reduced of 90%. Turbolence and ａnd small returning upwards flows move foliage, allowing product to reach lower vegetation and lower page of leaves, normally not involved by treatment. With this feature is possible to reduce application volume and product rate per hectare, enanching tank operating range and bringing economic benefits to the farmer.
AIR FLOW is powered by an hydraulic motor and has, with no price surcharge, possibility to adjust air speed (from 0 to 115 km/h), to best adapt to working conditions.
CLEANING KIT
Cleaning kit makes easier all operation at the end of the field work. Complete kit has 2 spinning nozzles for internal main tank cleaning (STANDARD) and high pressure cleaner gun (OPT) for external tank and boom cleaning. When spraying operation are temporary suspended and there is the need to rinse the circuit, DEVIOKIT by pass system avoids any dilution of product in half-filled main tank.
30 liters mixer
The pre-mixer reduces contact with hazardous chemicals during preliminary operations, and begins product dilution with flow from the main tank. Bottle-cleaner nozzle allows to use * of product, reducing the wastes in empty bottles. A smart parallelogram with spring lock takes the basket in comfortable position for the user to pour product and move levers, at the end of preparation the pre-mixer moves back close to main tank.
EASY MANEUVER WITH STEERING DRAWBAR
With the special steering drawbar, the wheels of sprayer follow track left by tractor, this feature reduces dramatically the amount of crushed plants at the edge of the field, production loss and disease susceptibility: grain quality improves! Maneuvers are also made easier by this feature; the device has a lock for road transportation. (This feature is not available in Pompeo R model).
