进口立式轴流混流泵美国立式轴流混流泵
进口立式轴流混流泵产品概述：
混流泵是美国泰乐采用优秀的水力模型，并满足各种工况要求的条件下精心设计而成。 该系列产品结构紧凑、合理，运行稳定可靠； 可选用开式、闭式；单基础、双基础等结构形式，使用范围十分广泛。
进口立式轴混流泵主要应用领域：
城镇工矿给排水、市政工程、污水处理；
钢铁、冶金、电厂、造船、水厂方面的循环、提升水等；
水利工程、江河治理；
农田灌溉、水产养殖、盐场等
进口立式轴混流泵性能范围：
流量：0.2—60 m3/s
扬程：2—30m
泵出水口径：350mm—4500mm
输送介质：清水、雨水、污水和海水等介质，温度50°C以下；
配套电机：
电源：380V、660V、6000V、10000V，50HZ；防护等级：IP23、IP44：绝缘等级：B级、F级
叶轮转向：从电机向下看，叶轮顺时针方向旋转
进口立式轴混流泵特点：
1轴流式水流设计，水量特大，省电、安装容易 2. 采用耐磨性特强之双组式机械轴封、耐海水、污水、污泥之磨损 3. 优秀水利模型，制作精良，保证了用户的性能要求；
4、 双重机械密封，可靠的防止漏水，大型泵因轴向力大，采用推力轴承，结构设计合理，润滑充分，散热良好，轴承使用寿命长；
进口立式轴混流泵美国泰乐TYLER售后服务：
1、按合同要求提供产品的合格证、铭牌、检验报告、产地证名、安装说明书等。
2、顾客在验收产品过程中，如出现与合同要求不符时，我司接到顾客通知后两小时内给予处理。
3、我司提供十二个月以上产品质保期，时间从验收合格之日起计算。
4、在正确安装和使用下，出现产品质量问题，本公司将负责到底。
Vertical axial flow pump
Product introduction of vertical axial flow mixed flow pump:
The United States is a mixed flow pump with hydraulic model is the most outstanding new music, and meet all the conditions required under the condition of carefully designed. This series of products are compact and reasonable in structure, stable and reliable in operation, and can be used in open and closed type.
Main application fields of vertical shaft mixed flow pump:
Urban water supply and drainage, municipal engineering, sewage treatment;
Iron and steel, metallurgy, power plants, shipbuilding, water, water, etc.;
Water conservancy project, river management;
Irrigation, aquaculture, salt etc.
The performance range of vertical axial flow pump:
Flow rate: 0.2 - 60 m3/s
Head: 2 - 30m
Pump outlet diameter: 350mm - 4500mm
Transmission medium: water, rainwater, sewage and sea water and other media, temperature 50 degrees below C;
Matching motor:
Power supply: 380V, 660V, 6000V, 10000V, 50HZ; protection grade: IP23, IP44: insulation grade: B class, F class
Impeller steering: look down from the motor, the impeller clockwise rotation
Imported vertical shaft mixed flow pump:
1 axial flow design, large water saving, easy installation, strong wear resistance characteristics using 2 dual mechanical seal, wear resistant to water, sewage and sludge of 3 excellent hydraulic model, the production of sophisticated, ensure the user's performance requirements;
4, double mechanical seal, reliable to prevent leakage, large pump due to axial force, the use of special thrust bearings, structural design is reasonable, full lubrication, good heat dissipation, bearing service life is long;
The United States imported vertical mixed flow pump shaft Taylor TYLER customer service service:
1, according to the contract requirements for product certification, nameplate, inspection report, certificate of origin, installation instructions etc..
2, the customer in the process of acceptance of the product, such as the emergence of the contract requirements and inconsistent, I received the notification of the customer within two hours after the treatment.
3, our company provides more than twelve months warranty period, the time from the date of acceptance.
4, in the correct installation and use, product quality problems, the company will be responsible in the end.
