进口立式管道泵美国进口立式管道泵
进口立式管道泵产品特点：
叶轮直接安装在电机的加长轴上，轴向尺寸短，结构紧凑，泵与电机轴承配置合理，能有效地平衡泵运转产生的径向和轴向负荷，从而保证了泵的运行平稳，震动噪音低。
轴封采用机械密封或机械密封组合，采用进口钛合金密封环、中型耐高温机械密封和采用硬质合金材质，耐磨密封，能有效地增长机械密封的使用寿命。
安装检修方便，无需拆动管路系统，只需卸下泵联体螺母即可抽出全部转子部件。
可根据使用要求即流量和扬程的需要采用泵的串、并联运行方式。
可根据管路布置的要求采用泵的竖式和横式安装。
进口立式管道泵应用领域：
供输送不含固体颗粒，具有腐蚀性，粘度类似于水的液体，适用于石油、化工、冶金、电力、造纸、食品、 制药和合成纤维等部门
进口立式管道泵工作条件：
- 吸入压力≤1.0MPa，或泵系统zui高工作压力≤1.6MPa，即吸入口压力+泵扬程≤1.6MPa、泵静压试验压力为≤2.5MPa，订货时请注明系统工作压力。泵系统工作压力大于1.6MPa时应在订货时另行提出，以便在制造时泵的过流部分和联接部分采用铸钢材料。 2. 环境温度＜40℃，相对湿度＜40% 3. 所输送介质中固体颗粒体积含量不超过单位体积的0.1，粒度＜0.2mm。
进口立式管道泵技术参数：
zui大流量：600m3/h
zui高扬程：155m
额定转速：1450~2900rpm(50HZ)，1750~3500rpm(60HZ)
额定温度：-10℃~105℃
zui大工作压力：1.6MPa
进口立式管道泵美国泰乐TYLER售后服务：
*的服务铸就*的企业让客户无后顾之忧。
1、按合同要求提供产品的合格证、铭牌、检验报告、产地证名、安装说明书等。
2、顾客在验收产品过程中，如出现与合同要求不符时，我司接到顾客通知后两小时内给予处理。
3、我司提供十二个月以上产品质保期，时间从验收合格之日起计算。
4、在正确安装和使用下，出现产品质量问题，本公司将负责到底。
Vertical pipe pump imported vertical pipe pump
Imported vertical pipe pump product features:
The impeller is directly mounted on the motor shaft extended, short axial size, compact structure, pump and motor bearings reasonable configuration, can effectively balance the pump functioning of the radial and axial load, so as to ensure the smooth operation of the pump vibration, low noise.
Seal with mechanical seal or mechanical seal combination, the use of imported titanium alloy sealing ring, medium and high temperature mechanical seal with carbide materials, wear-resistant sealing, can effectively increase the service life of mechanical seal.
Easy installation and maintenance, no need to remove the pipeline system, simply remove the pump nut can be extracted from the whole rotor parts.
Can be used according to the requirements of the flow and head of the need to use the pump series, parallel operation mode.
According to the requirements of piping layout using the vertical and horizontal pump installation.
Application of vertical pipe pump:
The utility model is suitable for conveying oil, chemical, metallurgy, electric power, papermaking, food, pharmaceutical, synthetic fiber, etc., and the utility model has the advantages of no solid particles, corrosion and viscosity
Working conditions of vertical pipe pump:
1 suction pressure is less than 1.0MPa, or pump system maximum working pressure is less than 1.6MPa, namely the suction pressure pump head, pump + = 1.6MPa hydrostatic test pressure is less than 2.5MPa, please specify when ordering the system working pressure. When the pump system working pressure is greater than 1.6MPa should be put in order, in order to make the pump when the flow part and the connection part of cast steel material. 2 ambient temperature of 40 degrees, relative humidity of less than 40% 3 in the transport medium of solid particles volume content of not more than 0.1 per unit volume, particle size of 0.2mm.
Technical parameters of imported vertical pipeline pump:
Maximum flow rate: 600m3/h
Maximum lift: 155m
Rated speed: 1450~2900rpm (50HZ), 1750~3500rpm (60HZ)
Rated temperature: -10 DEG C ~105 C
Maximum working pressure: 1.6MPa
The United States imported vertical pipeline pump Taylor TYLER customer service service:
The first-class service created a first-class enterprise so that customers no worries.
1, according to the contract requirements for product certification, nameplate, inspection report, certificate of origin, installation instructions etc..
2, the customer in the process of acceptance of the product, such as the emergence of the contract requirements and inconsistent, I received the notification of the customer within two hours after the treatment.
3, our company provides more than twelve months warranty period, the time from the date of acceptance.
4, in the correct installation and use, product quality problems, the company will be responsible in the end.
