进口离心油泵美国离心油泵
进口离心油泵工作原理:
叶轮安装在泵壳内，并紧固在泵轴上，泵轴由电机直接带动。泵壳*有一液体吸入与吸入管连接。液体经底阀6和吸入管进入泵内。泵壳上的液体排出口与排出管连接。在离心泵启动前，泵壳内灌满被输送的液体；启动后，启动后，叶轮由轴带动高速转动，叶片间的液体也必须随着转动。在离心力的作用下，液体从叶轮中心被抛向外缘并获得能量，以高速离开叶轮外缘进入蜗形泵壳。
离心油泵的主要过流部件有吸水室、叶轮和压水室。吸水室位于叶轮的进水口前面，起到把液体引向叶轮的作用；压水室主要有螺旋形压水室(蜗壳式)、导叶和空间导叶三种形式；叶轮是泵的zui重要的工作元件，是过流部件的心脏，叶轮由盖板和中间的叶片组成。
进口离心油泵应用领域：
用来输送汽油、煤油、柴油，航空煤油等石油产品。介质温度在-20℃～+80℃，是一种优良的船用装卸油泵。并适用于陆地油库、油罐车等储油装置的油料输送。也可以用来输送海水、淡水等。
进口离心油泵技术参数：
流量：6.25-500m?/h; 扬程：13-650m; 功率：2.2-400KW; 转速：1450-2950r/min;
口径：φ50-φ300; 温度范围：≤105℃; 工作压力：≤3.0Mpa； 材质：铸铁、铸钢
卧式多级离心油泵系单吸多级分段式离心泵，供输送油品及物理化学性质类似于油品的液体之用。
进口离心油泵美国泰乐TYLER售后服务：
1、按合同要求提供产品的合格证、铭牌、检验报告、产地证名、安装说明书等。
2、顾客在验收产品过程中，如出现与合同要求不符时，我司接到顾客通知后两小时内给予处理。
3、我司提供十二个月以上产品质保期，时间从验收合格之日起计算。
4、在正确安装和使用下，出现产品质量问题，本公司将负责到底。
Centrifugal oil pump
Working principle of imported centrifugal pump:
The impeller is installed in the pump shell and is fastened on the pump shaft. The central part of the pump casing is connected with a liquid suction pipe. The liquid through the bottom valve 6 and the suction tube into the pump. The liquid discharge port on the pump casing is connected with the discharge pipe. Before the start of the centrifugal pump, the pump shell is filled with the liquid to be delivered; after the start, start, the impeller driven by the high-speed rotation of the shaft, the liquid between the blades must also be with the rotation. Under the action of centrifugal force, the liquid was thrown from the impeller center and outer edge of the energy leaving the impeller at high speed into the outer pump shell shaped cochlea.
The main components of centrifugal oil pump are suction chamber, impeller and pressure chamber. The front room is located on the water inlet of the impeller to the liquid into the impeller; the pressurized water chamber main spiral water pressure chamber (spiral), guide vane and guide vane three forms; the impeller is the most important work element pump, is the heart of the flow passage components, impeller cover and blade by an intermediate.
Application of imported centrifugal pump:
Used to transport gasoline, kerosene, diesel oil, aviation kerosene and other petroleum products. The utility model has the advantages that the medium temperature is -20 DEG C to +80 DEG C, and is an excellent ship loading and unloading oil pump. The utility model is suitable for the oil transportation of the oil storage devices such as land storage tanks and oil tanks. Can also be used to transport sea water, fresh water, etc..
Technical parameters of imported centrifugal pump:
Flow: 6.25-500m? /h; head: 13-650m; power: 2.2-400KW; speed: 1450-2950r/min;
Diameter: 50-. 300; temperature range: less than or equal to 105 DEG C; working pressure: 3.0Mpa; material: cast iron, cast steel
The utility model relates to a horizontal multi-stage centrifugal oil pump, which is a single suction multi-stage centrifugal pump, which is used for transporting oil and the physical and chemical properties similar to the liquid of oil.
The United States imported centrifugal pump TYLER Taylor customer service service:
1, according to the contract requirements for product certification, nameplate, inspection report, certificate of origin, installation instructions etc..
2, the customer in the process of acceptance of the product, such as the emergence of the contract requirements and inconsistent, I received the notification of the customer within two hours after the treatment.
3, our company provides more than twelve months warranty period, the time from the date of acceptance.
4, in the correct installation and use, product quality problems, the company will be responsible in the end.
