日新SLRP卫生型自吸泵

SLRP系列泵是特别设计用来处理含有一部分气体的流体物料.此类泵可广泛用于食品,化工,制药及类似要求的应用场合,特别是在（CIP）就地清洗系统中用作回流泵.

标准设计:

卫生机械密封

机械密封的静环由AISI316L钢内嵌石墨构成,动环则由碳化硅制成.SLRP泵有一个不锈钢的外罩保护马达,还有四个可调节的不锈钢支脚.

Application

The SLRP pump is liquid ring pump which is specially designed for pumping liquids containing air or gas. The pump is used in food, chemical, pharmaceutical and similar .the pump can be used for CIP return.

Standard design

Sanitary single seal with stationary seal ring of acid resistant steel AISI316Lwith sealing surface

in carbon and rotating of silicon carbide. The pump has a stainless steel shroud for protection of the motor, and the complete unit is supported on four adjustable stainless steel legs

材质:

所有过液部件,泵壳,泵盖和叶轮均由AILI316L不锈钢制造.

过液部分材质: AISI316L不锈钢

其它部分材质: AISI304不锈钢

外表面:钛色

内表面:抛光0.4

过液密封材料:EPDM乙丙橡胶

Materials

All product wetted parts, pump casing, casing cover and impeller are made of acid resistant steel AISI316LMotor shroud is made of stainless steel AISI 304 seals are made of EPDM rubber

Product wetted steel parts: Acid resistant steel AISI316L

Other steel parts: stainless steel AISI304

Outside surface: TI

Inside surface: bright0.4

Product wetted seals: EPDM rubber

技术参数:

zui大入口压力:     0.5 MPa

温度范围:         -10℃到+140℃（EPDM）

噪声水平（1米处）  小于85dB（A）

电压和频率:   3-,50HZ,220～240V/380～420V/660～690V, ⊿/Y

电机型号:     50HZ: 4,5.5,7.5KW

Technical data

Max. Inlet pressure:      0.5 MPa

Temperature range:         -10℃to+140℃（EPDM）

Noise level （at1 m）      <85dB （A）

Voltage and frequency:   3-,50HZ,220～240V/380～420V/660～690V, ⊿/Y

Motor sixes:             50HZ: 4, 5.5, 7.5KW

配用电机:

1电机按照标准设计制造

  电工委员会IEC34,IEC72

  英国标准BS4999-5000

  澳大利亚标准AS1359-2

  德国标准DIN42673

  符合欧共休"CE"标记要求

2电机符合下列标准

GB755-87     GB10069-88     Q/JBQS28-2000

3合理的结构设计:灵活的引出线方向

4*的电器性能

  低噪音,低振动,高性能的防护等级

  电机的标准设计防护等级为IP55,可按用户要求提供更高要求的防护等级.

  适用双频率,宽电压使用

  电机设计考虑了不同地区的电压变化,使电机适应多个地区电压使用,并保证用户使用寿命.

Motors

1. These motors are built to comply with current international

  Standards international Electro technical

  Commission EC34and IEc72

  British standard BS5000 and BS 4999

  Australian standard AS13592-2

  German standard DIN42673

  EU directives to fulfill European “CE" Marking

2 these motors are built to comply current national standards

  GB755-87     GB10069-88     Q/JBQS28-2000

3 Mechanical Design: Terminal boxes

4 Electrical Designs

  Minimum noise and vibration levels

  Maximum Degrees of protection

  All motors are protected to IP 55as a minimum.

  Higher levels of protection are available on request.

  Service and Operating conditions

  Motors are designed to be insensitive to wide supply voltage fluctuations

  Class F insulation offers greater reliability and security