进口塑料气动隔膜泵｜美国塑料气动隔膜泵

进口塑料气动隔膜泵技术参数：

zui大流量：18.9-568L/min  zui大扬程：70-84m  出口压力：0.7-0.84MPa
口径：10-100mm 入气口径：1/4、1/2 颗粒直径：1.5-6.3mm
zui大虹吸高度(干抽或湿抽)：2.5-5.48m zui大输送固体颗粒：1.5-6.4mm
zui大空气消耗量：9.0-45scfm   每行程流量：(小口径)23cc

每往复流量：46cc、0.15-3.9L zui大往复速度：(小口径：干运转320cpm，湿运转250cpm)；145-400cpm

进口塑料气动隔膜泵概述：

进口塑料气动隔膜泵是德国洛克开发的新一代代气动隔膜泵，具有质量可靠使用寿命长、噪音底、震动小、*死机、做工精细等六大优点，即能抽送流动的液体，又能输送一些不易流动的介质，具有自吸泵、潜水泵、屏蔽泵、泥浆泵和杂质泵等输送机械的许多优点。 

进口塑料气动隔膜泵工作原理：

塑料气动隔膜泵是一种以压缩空气为动力，由膜片往复变形造成容积变化的容积泵，其工作原理近似于柱塞泵，由于气动隔膜泵工作原理的特点，因此气动隔膜泵具有以下特点： （1）泵不会过热：压缩空气作动力，在排气时是一个膨胀吸热的过程，气动泵工作时温度是降低的，无有害气体排出。 （2）不会产生电火花：气动隔膜泵不用电力作动力，接地后又防止了静电火花 （3）可以通过含颗粒液体：因为容积式工作且进口为球阀，所以不容易被堵。 （4）对物料的剪切力极低：工作时是怎么吸进怎么吐出，所以对物料的搅动zui小，适用于不稳定物质的输送 （5）流量可调节，可以在物料出口处加装节流阀来调节流量。

进口塑料气动隔膜泵美国泰乐TYLER售后服务：

用户*，信誉*，优质、完善的售后服务是我们产品价值的延伸和对客户利益的重要保证，我公司服务质量管理体系的宗旨是：建立并不断完善科学、合理、高效的服务质量管理体系，公正、准确、及时地完成客户的售后服务质量保障工作，为我公司的客户服务建立良好、全面、充分的服务体系。

Imports of plastic pneumatic diaphragm pump imported plastic pneumatic diaphragm pump

Technical parameters of imported plastic pneumatic diaphragm pump:

Maximum flow: 18.9-568L/min maximum head: 70-84m outlet pressure: 0.7-0.84MPa

Caliber: 10-100mm into gas diameter: 1/4, 1/2 particle diameter: 1.5-6.3mm

Maximum siphon height (dry or wet pumping):2.5-5.48m maximum delivery of solid particles: 1.5-6.4mm

Maximum air consumption: 9.0-45scfm per stroke: (small diameter) 23cc

Each reciprocating flow: 46cc, 0.15-3.9L maximum reciprocating speed: (small diameter: dry running 320cpm, wet running 250cpm); 145-400cpm

Introduction of imported plastic pneumatic diaphragm pump:

Plastic pneumatic diaphragm pump is the development of a new generation of German Rock pneumatic diaphragm pump, with reliable quality and long service life, low noise, small vibration, never crashes, six major advantages of working fine, the flow of liquid can be pumped, and easy to transport some of the flow medium, which has many advantages of self suction pump, submersible pump, shield pump, pump mud and impurities such as transportation machinery.  

Working principle of imported plastic pneumatic diaphragm pump:

Plastic pneumatic diaphragm pump is a powered by compressed air, the reciprocating diaphragm deformation caused by the volume change of volume pump, its working principle is similar to piston pump, because of the characteristics of pneumatic diaphragm pump working principle, so the pneumatic diaphragm pump has the following characteristics: (1) pump will not overheat: Powered by compressed air and in the exhaust is an endothermic process of expansion, the pneumatic pump when the temperature is lower, no harmful gas emissions. (2) does not produce spark: pneumatic diaphragm pumps do not have electricity for power, ground and later to prevent electrostatic spark (3) liquid containing particles can be: because the volume of imports and working for the ball, so can not be easily blocked. (4) low shear stress on the material: how the work of breathing in how spit, so the smallest stir of materials suitable for the delivery of unstable substances (5) flow can be adjusted, the throttle valve can be installed to regulate the flow at the exit of materials.

The United States imports of plastic pneumatic diaphragm pump Taylor TYLER customer service service:

Customer first, reputation first, customer service quality, perfect service is the important guarantee of our products and to extend the value of the interests of customers, our service tenet is: quality management system, establish and improve the service quality management system is scientific, reasonable and efficient, fair, accurate and timely completion of customer service and customer service quality assurance the establishment of good, comprehensive, full service system for my company's customer service.