进口屏蔽式管道泵｜美国进口屏蔽式管道泵
进口屏蔽式管道泵产品特点：
1、泵结构紧凑，机泵一体化，体积小。其立式结构具有安装占地面积小，运行平稳，安装无需调整。
2、泵进出口设计成规格相同法兰，且位于同一中心线上，可象阀门一样直接安装在管路上，且中心低，便于管道布置，安装特别方便。
3、泵与电机同轴，轴向尺寸短，使泵运行更加平稳，噪音低。
4、取消传统轴封方式，避免了输送介质的外泄，因此具有*无泄露的显著特点。
5、用滑动轴承替代常规电机滚动轴承，使泵具有运行特别平稳，振动噪音极低。
6、安装检修方便，无需拆动管路系统，只要拆下连接体螺母即可抽出全部转子部件进行检查和维修。
进口屏蔽式管道泵工作条件：
- 电源额定电压为380V，频率为50Hz，三相交流电；2、输送流体不应含有体积比超过0.1%和粒度大于0.2mm的固体颗粒；3、输送液体的温度≤120℃；4、 系统压力不超过1.0MPa，不小于50Kpa；如超过请订货时注明5、环境温度不超过40℃ 6、海拔不超过1000mm
进口屏蔽式管道泵技术参数：
流量：6.3～1080m3/h
扬程：12.5～125m
口径：40～300mm
转速：1450r/min、2900r/min
功率：0.37～160kw
进口屏蔽式管道泵美国泰乐TYLER售后服务：
*的服务铸就*的企业让客户无后顾之忧。
1、按合同要求提供产品的合格证、铭牌、检验报告、产地证名、安装说明书等。
2、顾客在验收产品过程中，如出现与合同要求不符时，我司接到顾客通知后两小时内给予处理。
3、我司提供十二个月以上产品质保期，时间从验收合格之日起计算。
4、在正确安装和使用下，出现产品质量问题，本公司将负责到底。
Inlet shield type pipeline pump
Features of imported canned pipeline pump:
1, the pump structure is compact, the pump integration, small size. The vertical structure of the utility model has the advantages of small installation area, stable operation and no need to adjust the installation.
2, the pump inlet and outlet design into the same size of the flange, and is located in the same center line, can be installed directly in the pipeline as the valve, and the center is low, easy to pipe layout, installation is particularly convenient.
3, pump and motor coaxial, short axial size, so that the pump running more smoothly, low noise.
4, cancel the conventional shaft seal to avoid leakage of medium, therefore has the advantages of no leakage.
5, the use of sliding bearings instead of conventional motor rolling bearings, so that the pump has a particularly stable operation, low vibration noise.
6, easy installation and maintenance, without dismantling the pipeline system, as long as the removal of the connection nut can be extracted from all the rotor parts for inspection and maintenance.
Working conditions of imported canned pipe pump:
1, the power supply rated voltage 380V, frequency 50Hz, three-phase alternating current; 2, the transmission fluid containing solid particles should not exceed 0.1% and the volume ratio of particle size greater than 0.2mm; the temperature is less than or equal to 3, liquid and 120 DEG C; 4, the system pressure is less than 1.0MPa, not less than 50Kpa; please specify when ordering more than 5 the ambient temperature does not exceed 40 degrees, 6 at no more than 1000mm
Technical parameters of imported canned pipeline pump:
Flow: 6.3 ~ 1080m3/h
Head: 12.5 ~ 125m
Caliber: 40 ~ 300mm
Speed: 1450r/min, 2900r/min
Power: 0.37 ~ 160kW
The United States imports shielded pipeline pump TYLER Taylor customer service service:
The first-class service created a first-class enterprise so that customers no worries.
1, according to the contract requirements for product certification, nameplate, inspection report, certificate of origin, installation instructions etc..
2, the customer in the process of acceptance of the product, such as the emergence of the contract requirements and inconsistent, I received the notification of the customer within two hours after the treatment.
3, our company provides more than twelve months warranty period, the time from the date of acceptance.
4, in the correct installation and use, product quality problems, the company will be responsible in the end.
