进口可变容量叶片泵组美国可变容量叶片泵组

进口可变容量叶片泵组概述：

可变容量叶片泵转子旋转时，叶片在离心力和压力油的作用下，尖部紧贴在定子内表面上。这样两个叶片与转子和定子内表面所构成的工作容积，先由小到大吸油后再由大到小排油，叶片旋转一周时，完成一次吸油与排油。

进口可变容量叶片泵工作原理：

泵由转子1、定子2、叶片3、配油盘和端盖等部件所组成。定子的内表面是圆柱形孔。转子和定子之间存在着偏心。叶片在转子的槽内可灵活滑动，在转子转动时的离心力以及通入叶片根部压力油的作用下，叶片顶部贴紧在定子内表面上，于是两相邻叶片、配油盘、定子和转子间便形成了一个个密封的工作腔。当转子按逆时针方向旋转时，图右侧的叶片向外伸出，密封工作腔容积逐渐增大，产生真空，于是通过吸油口6和配油盘5上窗口将油吸入。而在图的左侧。叶片往里缩进，密封腔的容积逐渐缩小，密封腔中的油液经配油盘另一窗口和压油口1被压出而输出到系统中去。这种泵在转子转一转过程中，吸油压油各一次，故称单作用泵。转子受到径向液压不平衡作用力，故又称非平衡式泵，其轴承负载较大。改变定子和转子间的偏心量，便可改变泵的排量，故这种泵都是变量泵。

进口可变量叶片泵原理以及特性：

变量叶片泵工作原理 变量叶片泵的定子内表面是一个圆形，转子与定子间有偏心距，在配油盘上只开有一个吸油窗口和一个压油窗口。当转子在电动机驱动下按图示箭头方向旋转时，叶片经定子下半部时，在离心力的作用下，从叶片槽中伸出，两叶片间的密封容积增大

进口可变量叶片泵技术参数:

流 量：8-40L/min
压力：3.5-7.0MPa
转速：800-1800r/min
驱动功率：0.7-5.8kw
配管尺寸：进口：1、1 1/2   出口：3/4、1 1/4

进口可变量叶片泵美国泰乐TYLER售后服务:
*的服务铸就*的企业让客户无后顾之忧。
1、按合同要求提供产品的合格证、铭牌、检验报告、产地证名、安装说明书等。
2、顾客在验收产品过程中，如出现与合同要求不符时，我司接到顾客通知后两小时内给处处理。
3、我司提供十二个月以上产品质保期，时间从验收合格之日起计算。
4、在正确安装和使用下，出现产品质量问题，本公司将负责到底

Variable capacity vane pump group of variable inlet vane pump

Overview of imported variable capacity vane pumps:

When the rotor of the variable capacity vane pump rotates, the blade is attached to the inner surface of the stator under the action of centrifugal force and pressure oil. The working volume of two rotor blades and the inner surface of the stator and the first increase after absorbing from large to small oil, rotating blades of a week, a row of oil and oil.

Working principle of variable capacity vane pump:

By 1, the pump rotor stator blade 2, 3, valve plate and the end cover and other components. The inner surface of the stator is a cylindrical hole. Eccentricity between rotor and stator. The leaves in the groove of the rotor can be flexibly slid, the centrifugal force when the rotor rotates and pass into the blade root pressure oil, at the top of the blade tightly on the inner surface of the stator, and the two adjacent blades with oil pan between the stator and rotor to form a sealed working chamber. When the rotor is rotating in the counterclockwise direction according to the figure on the right side of the blade, extends outward, the sealing chamber volume increases, resulting in vacuum, then through the suction port 6 and 5 on the oil pan with oil suction window. And on the left side of the graph. The blade to indent, seal cavity volume gradually reduced, the sealing cavity in the oil pan with oil another window and pressure oil port 1 is pressed and output to the system. This pump rotor in a turn, the oil pressure of oil each time, so that a single action pump. The rotor is subjected to radial hydraulic imbalance force, so it is also called the unbalanced pump. Changing the eccentricity between the stator and the rotor, the pump displacement can be changed, so this pump is variable pump.

Principle and characteristics of variable vane pump:

The stator vane pump working principle of variable vane pump, the inner surface is a circle, between the rotor and the stator with eccentricity, there is a kitchen window and a window open only in the oil pressure oil pan. When the rotor is driven by the motor to rotate according to the direction of the arrow, the blade is extended from the groove of the stator under the action of the centrifugal force, and the sealing volume between the two blades is increased

Technical parameters of imported variable vane pump:

Flow volume: 8-40L/min

Pressure: 3.5-7.0MPa

Speed: 800-1800r/min

Drive power: 0.7-5.8kw

Size: 1, 1: Import Export: 3/4, 1 1/4 1/2

The United States imported variable vane pump Taylor TYLER customer service service:

The first-class service created a first-class enterprise so that customers no worries.

1, according to the contract requirements for product certification, nameplate, inspection report, certificate of origin, installation instructions etc..

2, the customer in the process of acceptance of the product, such as the emergence of the contract requirements and inconsistent, I received the notification of the customer within two hours after processing.

3, our company provides more than twelve months warranty period, the time from the date of acceptance.

4, in the correct installation and use, product quality problems, the company will be responsible in the end