≮主要结构性能参数≯Main performance parameters of the structure:
☆.传动方式：电磁驱动
★.Mode of transmission: electromagnetic driver
☆.连接方式：内螺纹、法兰、焊接
★.Connection mode: internal thread, flange, welding
☆.结构形式：常开、常闭、零压差、（可带信号反馈装制）
★.Structure: normally open, normally closed, zero pressure difference, （can be packed with signal feedback）
☆.密封材质：丁青橡胶NBR、氟橡胶FKM、聚四氟乙烯PTEE等。
★.Packing material: FKM Ding Qing NBR rubber, fluorine rubber, ptfe PTEE and so on.
☆.适用压力：0.6Mpa≤4.0Mpa
★.Apply pressure: 0.6Mpa≤4.0Mpa
☆.制造口径：DN15≤DN350
★.Manufacturing diameter: DN15≤DN350
☆.适用温度：≤90℃
★.Applicable temperature: ≤90℃
☆.适用电压：AC220V/230V/240V/110V/24V 50/60HZ DC24V/12V +10%到-10%允许波动
★.Applicable voltage: AC220V / 230 v / 240 v / 110 v / 24 v 50/60 hz DC24V / 12 v + 10% to - 10% allowed fluctuation
☆.防护性能：防水、防爆（Exd IICT5）、防腐
★.Protective performance: waterproof, explosion-proof （Exd IICT5） and corrosion
☆.适用介质粘度： 小于50C St（大于时需定制）
★.Applicable medium viscosity: less than 50 c St （greater than the need to customize）
☆.接线方式： 接线座式；引线式；插头式
★.Connection mode: a type; Lead type; Plug type
☆.阀体材料：不锈钢、铸钢、碳钢、铸铁等。
★.Body material: stainless steel, cast steel, carbon steel, cast iron, etc
☆.适用介质：水、气、油、蒸汽、燃气、腐蚀流体等
★.Applicable medium: oil, gas, water, steam, gas, corrosive fluid, etc
杰一其他产品：高压并联电磁阀 高压三通电磁阀 高压双联电磁阀 高压双联球阀 常压双联过滤器 双联三通球阀 双联闸阀 双联气动阀
