供应CWE螺旋阀口袋包装机螺旋阀口袋包装机

CWE P. V. P. E valve bag packers are reliable, simple construction with proven effieciency.
PVPE （Pneumatic Valve Bag Packaging Equipment） is an air flow valve bagger designed to fill dry, granulated powdered or flaked products into valve bags. The unit is a gross weigh type machine, ensuring that all product is in the bag at the time of final weighment. The air flow system is capable of high production rates while maintaining good accuracies. The machine is Ruggedly constructed, complemented byTop Quality pneumatic and electronic components.

Developed over the last 25 years and refined with the latest automation components, the P. V. P. E comes in configurations from simplistic manual placement of valve bags by hand through to a fully automated placement and removal and when linked with further CWE products a complete filling to palletizing line can be achieved.

How It Works:
PVPE Air Packer fills bags by weight. The PVPE can be configured for manual placement of valve bags, to a fully automated placement and removal solution, by integrating with Bradwoods Packaging's complete filling to palletizing lines.
1. The bagger is fed from an overhead hopper, silo or mixer containing the product to be bagged.
2. The packing cycle begins with a charge of material from the overhead vessel being allowed to fall into the PVPE holding chamber.
3. Low pressure is applied to the top and bottom of the chamber forcing product out the bottom fill tube into your bag. To assist the flow of product a fluidizing bed of air is introduced across the sloping bottom of the holding chamber. The PVPE packer works on differential pressure between the chamber where the product is stored and atmosphere where the product comes out of the nozzle （where valve bag is placed）
4. Once the aeration pad fluidizes the product in the chamber these differentials cause the product to naturally flow and fill the valve bags at rates typically 5-8 bags per minute@ 20kg
5. Electronic weighing and supervisory Programmable Logic Control （PLC） monitors the bag weight and controls the bag filling process.
6. A "kicker" table automatically ejects the bag at the completion of the cycle.

The cycle repeats, with a new bag fed onto the feed tube.

Products suitable for valve bag filler include sands, cement mixes, tile adhesives, plastics, renders and granulated rubber

What You Get With PVPE Air Packer
1. Constructed from Mild Steel And powered Coated, so it's built to last and makes cleaning a breeze
2. High accuracy via patented load cell technology
Easy clean out and changeover of new products without contamination via submarine style rear hatch
3. After Bradwood Packaging installs your PVPE you get hands on training and documentation, to maximise your ROI
4. The air flow feed system is capable of high production rates while maintaining good accuracies.
5. Operator friendly easy set and forget controls
6. Universal and industrial components give the machinery extra long life cycles the way machinery should be built
7. Manufactured to comply above and beyond Australian standards
8. Pneumatic and electrical control equipment housed in positive pressure enclosure, ensuring dust free components
9. Built from structural steel giving maximum strength with minimal dimensions
10. Additional second stage filling hand wheel for adjusting slow speed flow of product
11. Industrial high strength anti- wearing butterfly valve specifically designed for abrasive products
12. Variable body height to suit your bag sizes and product line
13. The heart of PVPE is your PLC controller interface, it's simple to operate Your operators will have it all at the tip of their fingers
14. Don't worry about security, because you can add password protected operator access levels
15. The flexible and modular Packaging System can be interfaced with all filling systems and check weighers, so the same control panel operate all packers and weighers.